MGDM-201

Hi-Rel Grade, DC/DC Converter, 200 W

General Characteristics

  • Additional functions : on/off, sense, parallelization, reference voltage, input current ripple reduction
  • External synchronization range : 285 to 310 KHz
  • Galvanic isolation input/output : 1500 Vdc
  • Nominal power up to : 200 W
  • Output current limit adjustment
  • Protections : input undervoltage lockout, input overvoltage lockout, output current limitation, over temperature
  • Switching frequency : 270 KHz
  • Trim adjustment : 10 to 110 %
  • RoHs

Key Features

  • No load to full load operation
  • No optocoupler for high reliability
  • Single output
  • Soft start

Series Description
The MGDM-201 series features a range of 200 W military grade isolated dc/dc converters with ultra-wide input voltage range of 9-45 or 16-80 Volts dc. The series includes single output voltage choices of 3.3, 5 12, 15, or 24 Vdc. Using fixed switching frequency, the converter is based on a forward topology, and uses magnetic feed-back technology instead of classical opt-coupler for an improved reliability. The converter does not embed complex logic circuitry, and it features multiple functions. The ultra-wide output voltage trim allows users to define the output voltage value with only one low power resistor. To avoid input bus drop, in case of load failure, the Itrim function will limit the output power.
The converter's switching frequency can be slightly shifted to avoid radar bandwidth or simply synchronized to another converter to reduce switching noise. The output current sharing function allows connecting multiple converters in parallel in order to boost output power. The series is equipped with useful protections like soft-start for inrush current limitation, overload and short circuit protection, input under voltage lockout, and over temperature shut-down. The MGDM-201 is especially suitable for demanding applications. It comes in a fully potted metallic case that can operate with temperature ranging from -55 to 105°C.
  

Read more ...
Product Selection

This product selection table includes all available versions. Other references may be offered – see technical datasheets.
For more information, please consult factory.

Reset filters
Characteristics
More characteristics ...
Reference Status Output power Input voltage Max. transient input voltage Switching frequency Output voltage Output current Min. transient input voltage Output Nbr Max power per channel Case dimensions Standard electrical functions Operating case temp. range Case material Max power in drop out operation UVLO range Output voltage trim Isolation voltage Synchronization freq. range Efficiency Weight Synchronization Options RoHS / SnPb
MGDS-201-H-B Active 200 W 9 - 45 Vdc 60.0 Vdc / 500 ms 270 KHz 3.3 Vdc 35 A 8.0 Vdc / 1 s S 72.8 x 48 x 12.9 UVLO, OCP, OVP, SCP, OTP
VIF, TRIM, ITRIM, SENSE
-40 to 105 °C Metallic black anodized coating 10 to 110 % 1500 Vdc 285 to 310 KHz 88 % 105 Grams IN/OUT T, S
MGDS-201-H-C Active 200 W 9 - 45 Vdc 60.0 Vdc / 500 ms 270 KHz 5 Vdc 35 A 8.0 Vdc / 1 s S 72.8 x 48 x 12.9 UVLO, OCP, OVP, SCP, OTP
VIF, TRIM, ITRIM, SENSE
-40 to 105 °C Metallic black anodized coating 10 to 110 % 1500 Vdc 285 to 310 KHz 88 % 105 Grams IN/OUT T, S
MGDS-201-H-E Active 200 W 9 - 45 Vdc 60.0 Vdc / 500 ms 270 KHz 12 Vdc 16.7 A 8.0 Vdc / 1 s S 72.8 x 48 x 12.9 UVLO, OCP, OVP, SCP, OTP
VIF, TRIM, ITRIM, SENSE
-40 to 105 °C Metallic black anodized coating 10 to 110 % 1500 Vdc 285 to 310 KHz 88 % 105 Grams IN/OUT T, S
MGDS-201-H-F Active 200 W 9 - 45 Vdc 60.0 Vdc / 500 ms 270 KHz 15 Vdc 13.4 A 8.0 Vdc / 1 s S 72.8 x 48 x 12.9 UVLO, OCP, OVP, SCP, OTP
VIF, TRIM, ITRIM, SENSE
-40 to 105 °C Metallic black anodized coating 10 to 110 % 1500 Vdc 285 to 310 KHz 88 % 105 Grams IN/OUT T, S
MGDS-201-H-I Active 200 W 9 - 45 Vdc 60.0 Vdc / 500 ms 270 KHz 24 Vdc 8.4 A 8.0 Vdc / 1 s S 72.8 x 48 x 12.9 UVLO, OCP, OVP, SCP, OTP
VIF, TRIM, ITRIM, SENSE
-40 to 105 °C Metallic black anodized coating 10 to 110 % 1500 Vdc 285 to 310 KHz 88 % 105 Grams IN/OUT T, S
MGDS-201-O-E Active 200 W 16 - 80 Vdc 100.0 Vdc / 100 ms 270 KHz 12 Vdc 16.7 A 14.0 Vdc / 1 s S 72.8 x 48 x 12.9 UVLO, OCP, OVP, SCP, OTP
VIF, TRIM, ITRIM, SENSE
-40 to 105 °C Metallic black anodized coating 10 to 110 % 1500 Vdc 285 to 310 KHz 88 % 105 Grams IN/OUT T, S
MGDS-201-O-F Active 200 W 16 - 80 Vdc 100.0 Vdc / 100 ms 270 KHz 15 Vdc 13.4 A 14.0 Vdc / 1 s S 72.8 x 48 x 12.9 UVLO, OCP, OVP, SCP, OTP
VIF, TRIM, ITRIM, SENSE
-40 to 105 °C Metallic black anodized coating 10 to 110 % 1500 Vdc 285 to 310 KHz 88 % 105 Grams IN/OUT T, S
MGDS-201-O-I Active 200 W 16 - 80 Vdc 100.0 Vdc / 100 ms 270 KHz 24 Vdc 8.4 A 14.0 Vdc / 1 s S 72.8 x 48 x 12.9 UVLO, OCP, OVP, SCP, OTP
VIF, TRIM, ITRIM, SENSE
-40 to 105 °C Metallic black anodized coating 10 to 110 % 1500 Vdc 285 to 310 KHz 88 % 105 Grams IN/OUT T, S

Output Nbr: S: Single output, B: Bi-outputs, D: Dual outputs, T: Triple outputs – Dual outputs products can be usable for single output or bi-outputs. Output Nbr E corresponds to a slave module (see DataSheet)
Case dimensions: L x W x H (maximum values in mm)
Standard electrical functions: Case: Case connection, OVLO: Input overvoltage lockout, UVLO: Input under voltage lockout, OCP: Output over current protection level, OPP: Output over power protection, OVP: Output over voltage protection level, SCP: Output short circuit protection, OTP: Over temperature protection, VIF: Pin for Input Current Ripple Reduction, SYNC: Pin for Synchronisation, TRIM: Pin for adjust ouput voltage, ITRIM: Pin for adjustement ouput current limitation, CC: Pin for capacitor charged signal, CD: Pin for capacitor discharged signal, UVLOadj: Pin for level undervoltage lockout adjust, VREF: Pin for output internal voltage reference, PF: Pin for power fail signal, SENSE: Pin for voltage regulation, REV.POL: Reverse polarity protection
Status NPR: Not preferred for new Design
Options: T Screening at start-up -55° C, Y High isolation 3000 Vdc, M On/Off function, S Screening and serialization, F Synchronization function

Technical Documentation
Pin Out
Materials Disclosure Disclaimer
Even though all possible efforts have been made to provide you with the most accurate information, we can not guarantee to its completeness and accuracy due to the fact that the data has been compiled based on the ranges provided and some information that may not have been provided by the subcontractors and raw material suppliers to protect their business proprietary information.