- Additional functions : on/off
- Galvanic isolation input/output : non isolated
- Power range : from 4 W to 75 W
- Protections : input reverse polarity
- EN50155 level 1800V & 8400V
- EN61000-4-5 level 4
- RIA 12
- Spike suppressor for Railway/Industrial
Converter DC/DC range of modules. This line of module is optimized to provide high efficiency up to 98% over the whole power range between 4 W and 75 W power.
The module includes also an EMI filter to provide compliance with EN55022 Class A together with GAIA Converter DC/DC modules.
The module is manufactured in a fully automated process to guarranty high quality. Each module is tested with a
Converter automated test equipment.
The LGDSI-75 features 2 modes of operations as follow:
Normal operation occurs when input bus line is in steady state permanent range. The LGDSI-75 is then operating in steady transparency state providing an output with a typical 1.5V drop-out voltage.
Transient and spikes operation
The LGDSI-75 can sustain both:
transient during 1s according or EN50155 requirements,
high spike levels up to 1.8kV with 5 Ohms impedance and 8.4kV with 100 Ohms impedance to meet international input bus standards of EN50155.
This product selection table includes all available versions. Other references may be offered – see technical datasheets.
For more information, please consult factory.
|Reference||Status||Output power||Input voltage||Max. transient input voltage||Switching frequency||Output voltage||Output current||Min. transient input voltage||Case dimensions||Standard electrical functions||Adj. hold-up capa final voltage||EMI Filter||Hold up mode threshold voltage||Operating case temp. range||Case material||Inrush current limiter||Max drop out in nomal mode||Charger switching frequency||Max power in drop out operation||DC resistance||UVLO min||Synchronization freq. range||Voltage drop @ I max||Weight||Synchronization||Transient elevator||Power dissipation||Options||RoHS / SnPb|
|LGDSI-75-Q-K||Active||75 W||43 - 154 Vdc||40 max Vdc||1.78 A||40.2 x 26.2 x 12.8 mm||ON/OFF, REV.POL||TBD Vdc||EN-55022||-40 to 95 �C||Metallic black anodized coating||28 Grams||N||N|
Output Nbr: S: Single output, B: Bi-outputs, D: Dual outputs, T: Triple outputs – Dual outputs products can be usable for single output or bi-outputs. Output Nbr E corresponds to a slave module (see DataSheet)
Case dimensions: L x W x H (maximum values in mm)
Standard electrical functions: Case: Case connection, OVLO: Input overvoltage lockout, UVLO: Input under voltage lockout, OCP: Output over current protection level, OPP: Output over power protection, OVP: Output over voltage protection level, SCP: Output short circuit protection, OTP: Over temperature protection, VIF: Pin for Input Current Ripple Reduction, SYNC: Pin for Synchronisation, TRIM: Pin for adjust ouput voltage, ITRIM: Pin for adjustement ouput current limitation, CC: Pin for capacitor charged signal, CD: Pin for capacitor discharged signal, UVLOadj: Pin for level undervoltage lockout adjust, VREF: Pin for output internal voltage reference, PF: Pin for power fail signal, SENSE: Pin for voltage regulation, REV.POL: Reverse polarity protection, SHARE: Pin for output current parallel sharing
Status NPR: Not preferred for new Design
Options: T Screening at start-up -55° C, Y High isolation 3000 Vdc, M On/Off function, S Screening and serialization, F Synchronization function, P Share function