HGMM-150

Hi-Rel Grade, AC/DC Isolated PFC, 150 W

General Characteristics

  • Additional functions : on/off, reference voltage, companion module drive control
  • External synchronization range : no synchro
  • Galvanic isolation input/output : non isolated
  • Nominal power up to : 150 W
  • Protections : output short circuit, over power, over temperature
  • Switching frequency : 250 Khz
  • Trim adjustment : no trim
  • Leaded only

Key Features

  • Active PFC
  • Dedicated for 115 Vac applications
  • Low input current harmonic distortion < 10%
  • MIL-STD-704, DO-160, ABD-100, MIL-STD-1399 compliant
  • Standard half brick package

Series Description
The GAIA Converter HGMM-150 designates a family of non isolated AC/DC power factor corrected modules. The HGMM-150 family is designed to be compatible with the latest airborne single phase input bus 115 Vac / 400 Hz for fixed and variable frequency. The modules accept an AC input voltage ranging from 95 Vac to 140 Vac and include active power factor that enables a very low level of current harmonic distorsion. 
The HGMM-150 modules include a soft start an active inrush current limitation, a permanent short circuit protection and an inhibit function. The soft-start/active current limitation eliminates inrush current during start-up, the short circuit protection protects the module against short-circuits of any duration by a shut down and restores to normal when the overload is removed. 
The HGMM-150 output voltage is set to 375 Vdc compatible with GAIA Converter high input voltage series of DC/DC converter and operates with a hold-up capacitance to allows transparency time and ripple reduction.The design has been carried out with surface mount components and is manufactured in a fully automated process to guaranty high quality. Every module is tested with a GAIA Converter automated test equipment. The modules are potted with a bi-component thermal conductive compound and packaged in a metallic case to ensure the module's integrity under high environmental conditions. 
The HGMM-150 is compliant with numerous avionics/military standards requirements among them with: 
- the latest Airbus standards ABD100: 
. permanent input range : 108-122 Vac 
. transient : 71Vac/15ms - 180Vac/100ms 
. variable frequency : 360 - 800 Hz 
. power factor : 0.95 
- the international standard DO-160D: 
. permanent input range : 100-122 Vac 
. transient : up to 180Vac/100ms 
- the US military standard MIL-STD-704E: 
. permanent input range : 108-118 Vac 
. transient : 80Vac/10ms - 180Vac/100ms
Read more ...
Product Selection

This product selection table includes all available versions. Other references may be offered – see technical datasheets.
For more information, please consult factory.

Reset filters
Characteristics
More characteristics ...
Reference Status Output power Input voltage Max. transient input voltage Switching frequency Output voltage Output current Min. transient input voltage Output Nbr Max power per channel Case dimensions Standard electrical functions Operating case temp. range Case material Isolation voltage Synchronization freq. range Efficiency Weight Power factor Total harmonic distorsion Input voltage frequency Options RoHS / SnPb
HGMS-150-W-T Active 150 W 95 - 140 Vac 180.0 Vac / 100 ms, 71.0 Vac / 15 ms 250 KHz 61.15 x 58.11 x 12.7 mm OPP, SCP, OTP -40 to 105 °C Aluminium alodined coating / Copper with tin finishing N/A 90 % 110 Grams 360 - 800 Hz T, S

Output Nbr: S: Single output, B: Bi-outputs, D: Dual outputs, T: Triple outputs – Dual outputs products can be usable for single output or bi-outputs. Output Nbr E corresponds to a slave module (see DataSheet)
Case dimensions: L x W x H (maximum values in mm)
Standard electrical functions: Case: Case connection, OVLO: Input overvoltage lockout, UVLO: Input under voltage lockout, OCP: Output over current protection level, OPP: Output over power protection, OVP: Output over voltage protection level, SCP: Output short circuit protection, OTP: Over temperature protection, VIF: Pin for Input Current Ripple Reduction, SYNC: Pin for Synchronisation, TRIM: Pin for adjust ouput voltage, ITRIM: Pin for adjustement ouput current limitation, CC: Pin for capacitor charged signal, CD: Pin for capacitor discharged signal, UVLOadj: Pin for level undervoltage lockout adjust, VREF: Pin for output internal voltage reference, PF: Pin for power fail signal, SENSE: Pin for voltage regulation, REV.POL: Reverse polarity protection
Status NPR: Not preferred for new Design
Options: T Screening at start-up -55° C, Y High isolation 3000 Vdc, M On/Off function, S Screening and serialization, F Synchronization function

Technical Documentation
Pin Out
Materials Disclosure Disclaimer
Even though all possible efforts have been made to provide you with the most accurate information, we can not guarantee to its completeness and accuracy due to the fact that the data has been compiled based on the ranges provided and some information that may not have been provided by the subcontractors and raw material suppliers to protect their business proprietary information.