Industrial Grade Product Qualification

The Industrial grade modules are compliant with CE regulations according to the Low Voltage Directive and for the majority of them according to the CEM Directive for conductive and radiated noise. The following qualification tests have been performed by an independent laboratory.




Standard specifications

Specification Standards Conditions
Life at hight temperature per IEC 68-2-2 1000 hours
95°C case
Humidity per IEC 68-2-3
Test Ca
Damp heat : 93 % H.R 56 days
Temperature : 40°C
Temperature cycling per IEC 68-2-14
Test N
 Number of cycles : 200
Temperature change : -40°C/+71°C
Transfer time : 40 min.
Steady state time : 20 min.
Vibration per IEC 68-2-6
Test Eb 		10 cycles in each axis
Frequency : 10 to 60Hz/60Hz to 2kHz
Amplitude/acceleration : 0,7 mm/10 g
Shock per IEC 68-2-27
Test Ea
 3 cycles in each axis
Peak acceleration : 100 g
Duration : 6 ms
Bumps per IEC 68-2-29
Test Eb
 2.000 bumps in each directions
Duration : 6 ms
Peak acceleration : 25 g
Electrical discharge susceptibility per EN55082-2
with EN61000-4-2
(IEC 801-2)		 Air discharge level  4 kV : sanction A
Contact discharge level  2 kV : sanction A
Air discharge level 8 kV : sanction B
Contact discharge level 4 kV : sanction B
Electrical field susceptibility per EN55082-2
with EN61000-4-3
(IEC 801-3)		 Antenna at 1 m distance
Value applied : 10V/m
Waveform : AM modulated 80 % 1 kHz
test : 26 MHz to 1 Ghz
Electrical fast transient usceptibility per EN55082-2
with EN61000-4-4
(IEC 801-4)		 Level 1 : 0,5 kV sanction A : module stand alone
Level 3 : 2 kV sanction B : module stand alone
Level 4 : 4 kV sanction A : with external filter
Waveform : 5/50 µs impedance 50 Ohm
Surges transient susceptibility
(see technical datasheet for complete details)		 per EN55082-2
with EN61000-4-5
(IEC 801-5) per EN50155		 Level 4 : 4 kV sanction A : with external filter
Waveform : 1.2/50 µs impedance 12 Ohm
Level 1,8 : 4 kV sanction A : with external filter
Waveform : 5/50 µs impedance 5 Ohm